1.- 50mm aluminum profile, type depending on site conditions, sealed with silicone mastic.

2.- Adhesive CEMENT FOAM AISLITE “P”

3.- Expanded polystyrene, polyurethane foam, polyisocyanurate foam board or phenolic.

4.- Mechanical fixation.

5.- Fiberglass alkali-resistant, embedded in CEMENT FOAM AISLITE “P”

6.- Aluminum angles, type depending on site conditions.

7.-Topcoat products BCP: BCP monolayer BCP P or R, granulite Maplexine, ceramic, porcelain, glass mosaic, etc..

8.- Shelves and flashing extensions if required.

9.- Silicone mastic.

10.- Receiving area of the humidity inside the building, which are removed:
a) transpiration through the boards of polystyrene / mineral wool and the actual transpiration of the materials that cover
b) aeration that occurs between the holes in the starting profile and the profile end of auction.

11.- Boot hole profile.